|STONE SEALER A GALLON SIZE|
0.00" x 0.00" x 0.00
stone sealer a 1 gallon size is a unique water based penetrating sealer which produces an invisible resistant barrier against oil and water stains. its is a safe, and virtually odorless product and does not contain any toxic or dangerous solvents.
uses: for protection of all natural stone such as marble , limestone, granite, travertine, slate, sandstone and for manufactured stone such as concrete, brick, rock, saltillo, and quarry tile as well as grout joints.
preparation: stone surface should be clean, dry, and free of waxes or other surface coatings.
new cement grout joints should be allowed to fully dry prior to application. application: apply sealer in an even and generous film onto the stone surface and grout joints using a tekon™ micro fiber mop or tek pad (micro fiber pad).
on polished stone: allow to absorb and dry for 1 to 2 hours. inspect surfaces and if a residue or film is visible, remove with water and tekon™ mop or pad. some polished granites are very porous and require a second application.
on porous stone: very porous stone will usually absorb all the sealer with the first application and no residue cleaning is necessary.
for best results, a second application should be applied one hour later. if the second application does not soak into the stone within ten minutes, wipe off excess.